Making my mother some stamps with COLOP Photopolymer

My mother, after seeing my doodles and watercolor  post, suggested that I try making stamps, which sounded fun.   I had most of the equipment from other projects to give it a go.  All I really needed was the photopolymer.   After ordering a bottle of COLOP photopolymer off amazon, it showed up a few days later (it wasn’t even amazon prime, so I was impressed).

My first idea was to shove it into my 3D printer.  The whole idea behind my new printer was that it uses UV Resin, which is what a photopolymer is.   Shine a UV light on it and it cures.   It turns out that this stamping resin is so highly viscous that it’s barely a liquid and 3D printer resin is still quite liquid.   I started pouring it into the printer and it was hard to stop it from pouring because it was pulling itself out of the bottle.

Well, I can tell you that didn’t go well.   It was far too thick and the printer didn’t like it.  After editing the 3D printer’s program to see if I could make it work, I found the cured photopolymer wasn’t sticking to the platform and just ended up making a mess.

Continue reading “Making my mother some stamps with COLOP Photopolymer”

Kudo3d Bean on Indiegogo

Just under a year go I contributed to an Indiegogo campaign for a SLA printer called Bean and it finally showed up at my doorstep last week.

Kudo3D Bean Indiegogo showed up!

This printer has been basically been running non-stop since it showed up.  I’m having a lot of fun with it.  So far I’ve mostly been printing little figurines from one of my favorite 3d artists, who recreates a lot of characters I like.  I know his models are good and this has let me figure out all the ins-and-outs of printing with resin.

Continue reading “Kudo3d Bean on Indiegogo”

3D Print Painting

yoshi

This weekend, I promised my co-worker I would spend some time doing some painting on some of the 3D items he requested. Why? Because I volunteer myself for everything.

I’ve done many many paintings, but 3D Prints are a bit hard to paint. First, they have a texture from the plastic layers (unless you do some post-processing). Second, they’re 3D, and unlike a painting, they don’t have any definite lines where the paint should stop. Third, I didn’t prime the object, because I printed it in the character’s main color so it took many layers to cover the green plastic. And last, I didn’t give it a clear coat to lock it all in, so I’m just waiting for him to accidentally scrape some of the paint off.

Basically, it can easily come out looking very messy. My co-worker seemed to really like it this morning when I brought it in, so maybe I’m being too picky. I hope it gets easier once I get a few more painted.

John is the Terminator

john term 1

I’m pretty sure John is trying to take over my 3D Printer.  He decided we needed to do another 3D scan and turn him into the terminator.

Surrounding his print with gallium, now he’s the Terminator being melted at the end of the movie.  He may need to do some chrome spray paint, but overall it’s was a pretty fun idea.

Roger Smith

20180214 075525

I finally printed something for my desk.  Everyone else has little chotskies all over their desks and mine just has paper everywhere. So I browsed the 3D repositories for something I’d like and found Roger Smith from American Dad on thingyverse.

3D Print of Roger the Alien

As soon as John (the guy I 3D scanned) saw it on my desk he took it.  What a jerk!  This is why I can’t have nice things.  And why I shouldn’t bring my 3D prints into the office.

At least I can just print another.

3D Body Scanning of John

structure

My coworker John was excited when I came in this morning.  “WHERE IS IT?” he shouted as I passed his office.

I had been annoying him with different methods of 3D scanning.  I kept taking him to one of the big open rooms in the office so I could walk around him and take photos or use different types software on my phone to see what would work best.    I was excited someone was willing to let me do it, turns out not many people want to be 3D scanned.   After many attempts, we found nothing was really working well.

Finally, I remembered I had bought a Structure sensor for my iPad years ago.   I had the sensor but couldn’t find the darn cables anywhere.  I ordered new ones and as soon as they came in I bothered him again to stand perfectly still in the middle of an open room while I slowly walked around him letting the software do its thing.

I dumped the results to my workstation and found we finally had a usable result.

So this morning when he was shouting at me, I produced the mini-John printing.

It could use some work, especially on the top of the head.  But, overall, I was pretty happy that we finally got it to work.  I still need to work on full body scans.  We tried that as well but the room we were in was making it pretty difficult.  I told him on a nice day we’ll have to go to the parking lot and give it another shot.

3D Printing Tiny Rick

tiny rick 3d printing

3D Printing Hercules Statue

Over the weekend, I got to sit down and do some playing with the new 3D printer.   I have to admit, the Ultimaker 3 is pretty amazing, especially when I compare it to my old machine.   Once I got it up and running, you pretty much just push the button and it does everything for you.   So I loaded up a Tiny Rick 3D file (by 3D Print Guy) that I downloaded from MyMiniFactory.com.  His prints are pretty stinking cute and I think I’ll be watching his account for new files.

Tiny Rick 3D Print

The new printer prints with water-dissolvable supports, which means I can pretty much print anything.  What used to be impossible (or just a huge pain) to print is now not an issue.  I can print a lot of these on my old printer also, but I’d have to sit there and cut away a lot of material it needed to print in order to prop things up while it printed.

So now, things come out looking like this:

(You can thank me for that tushy on your screen later.)

This print comes from the Scan The World Project which mostly consists of 3D scans of famous artworks.  This one is of a statue of Hercules from the Louvre Museum in Paris.

Once the print is done, it’s just tossed into a bucket of water and all the clear/white plastic will disappear within a few hours.

The only downside to 3D Printing is the patience required.  This machine is super easy to use, but printing with such detail takes literally forever.

Over a day to print a 5-inch statue… YIKES!   At least this printer is just a set-it-and-forget-it type of thing.  I think I got the print started early enough yesterday that it should be done printing before I get home from work today.

I also spent some time fixing my old machine.  The replacement parts came in and now I have dueling 3D printers in my basement.

New Ultimaker 3 3D Printer

20180126 082835

Ultimaker 3

Oh no, what have I done?

I may have talked myself into a new, updated and expensive 3D printer.   My old one is several years old and in 3D Printer years, that is like super ancient.

Last night, my new Ultimaker 3 printer arrived and after my nap (i’m old) I started unboxing it.   I have to say, these things have come a long way since I last bought one.  This thing is so slick.  Dual nozzles, dissolvable materials, streaming camera, self-leveling, swappable components, wifi…  Geez, Louise!

I pretty much just got it set up and didn’t get time to start printing anything.  But it arrived just as my old one broke down.   I ordered new parts for it, but this new one arrived just when I needed it and in time for the weekend!   Hopefully, lots of playing will occur.  Stay tuned for updates.